MULTIREGION & UNLOCK CRACK for the SAMSUNG M105 (may work on other Samsung DVDplayers too)

Hey I've searched for about a day, but I know the crack for multiregion. I think this will work:

Switch the player off and on. Held the play and stop buttons (for 10 seconds) just as it came up (but this didnt seem to do anything). I then did the following:

1. Press the Repeat button on your remote control

2. Using your remote control enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate:

for Region 1 use 2, 9, 3, 3 and 4
for Region 2 use 3, 8, 7, 6 and 7
for Region 3 use 5, 6, 7, 3 and 2
for Region 4 use 7, 6, 8, 8 and 4
for Region 5 use 5, 3, 8, 1 and 4
for Region 6 use 2, 4, 4, 6 and 2

3. A code should be displayed on the screen indicating the current Region setting of your unit.

4. Press the 9 button on your remote control for Region free, or 1 for Region 1, 2 for Region 2 and so on.

5. Press the Open button on your player

6. Press the Standby button on your remote control

I hope this will help!!!

For UNLOCKing your eject / dealerlock:

hold the STOP button on your DVD player and press the STANDBY button on your remote control

this works !!! :)

cya

Other Replys

Reply to this message
Name:
E-Mail:	(optional)
Subject:
Message:	: Hey I've searched for about a day, but I know the crack for multiregion. I think this will work: : Switch the player off and on. Held the play and stop buttons (for 10 seconds) just as it came up (but this didnt seem to do anything). I then did the following: : 1. Press the Repeat button on your remote control : 2. Using your remote control enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate: : for Region 1 use 2, 9, 3, 3 and 4 : for Region 2 use 3, 8, 7, 6 and 7 : for Region 3 use 5, 6, 7, 3 and 2 : for Region 4 use 7, 6, 8, 8 and 4 : for Region 5 use 5, 3, 8, 1 and 4 : for Region 6 use 2, 4, 4, 6 and 2 : 3. A code should be displayed on the screen indicating the current Region setting of your unit. : 4. Press the 9 button on your remote control for Region free, or 1 for Region 1, 2 for Region 2 and so on. : 5. Press the Open button on your player : 6. Press the Standby button on your remote control : I hope this will help!!! : For UNLOCKing your eject / dealerlock: : hold the STOP button on your DVD player and press the STANDBY button on your remote control : this works !!! :) : cya