LG DVD5083 VCD and SVCD hack

[ Other Replys ] [ Reply to this message ] [ Return to Discussion Forum ] Posted by darkseas on May 01, 19103 at 17:32:15:

In Reply to: Lg dvd 5083 Help! posted by John on April 17, 19103 at 06:41:48:

Here is the original hack:

To enable your player for VCD:

1. Power on the player with no disc in the drive.
2. Press Stop on the remote control.
3. Press Pause on the remote control.
4. Using the remote control, key in the following: 1,
4, 7, 2
5. Press the UP arrow three times
6. Press Program 6, Program 5 (the characters 04 FE
should now be displayed).
7. Press Enter.
8. Power the player off and then back on (bleu key on
the remote control)
9.Play a VCD

Then for SVCD do:

1 - Power up the dvd with no disc
2 - Press Pause and then press 1,4,7,2
3 - Press up arrow 6 times, the characters 07 00
should appear on the display, may be different for
your model
4 - Press Program 6, Program 5.
5 - Press Enter
6 - Power off and power on the player

If your tv is pal and the picture is green or yellow
use the s-video output of the player, and please write down all the prom values in case you need to restore them.

Your friend might have an Eastern model which has this (VCD) option enabled by default.

darkseas

Other Replys

LG DVD5083 Bits tricks darkseas 5/01/103 (0)

Reply to this message

Name:

E-Mail:
(optional)

Subject:

Message:
: Here is the original hack: : To enable your player for VCD: : 1. Power on the player with no disc in the drive. : 2. Press Stop on the remote control. : 3. Press Pause on the remote control. : 4. Using the remote control, key in the following: 1, : 4, 7, 2 : 5. Press the UP arrow three times : 6. Press Program 6, Program 5 (the characters 04 FE : should now be displayed). : 7. Press Enter. : 8. Power the player off and then back on (bleu key on : the remote control) : 9.Play a VCD : Then for SVCD do: : 1 - Power up the dvd with no disc : 2 - Press Pause and then press 1,4,7,2 : 3 - Press up arrow 6 times, the characters 07 00 : should appear on the display, may be different for : your model : 4 - Press Program 6, Program 5. : 5 - Press Enter : 6 - Power off and power on the player : If your tv is pal and the picture is green or yellow : use the s-video output of the player, and please write down all the prom values in case you need to restore them. : Your friend might have an Eastern model which has this (VCD) option enabled by default. : darkseas

Reply to this message
Name:
E-Mail:	(optional)
Subject:
Message:	: Here is the original hack: : To enable your player for VCD: : 1. Power on the player with no disc in the drive. : 2. Press Stop on the remote control. : 3. Press Pause on the remote control. : 4. Using the remote control, key in the following: 1, : 4, 7, 2 : 5. Press the UP arrow three times : 6. Press Program 6, Program 5 (the characters 04 FE : should now be displayed). : 7. Press Enter. : 8. Power the player off and then back on (bleu key on : the remote control) : 9.Play a VCD : Then for SVCD do: : 1 - Power up the dvd with no disc : 2 - Press Pause and then press 1,4,7,2 : 3 - Press up arrow 6 times, the characters 07 00 : should appear on the display, may be different for : your model : 4 - Press Program 6, Program 5. : 5 - Press Enter : 6 - Power off and power on the player : If your tv is pal and the picture is green or yellow : use the s-video output of the player, and please write down all the prom values in case you need to restore them. : Your friend might have an Eastern model which has this (VCD) option enabled by default. : darkseas