Re: Pioneer DV-343

[ Other Replys ] [ Reply to this message ] [ Return to Discussion Forum ] Posted by Karim on August 30, 19103 at 23:57:11:

In Reply to: Pioneer DV-343 posted by Dil on April 03, 19103 at 17:43:58:

: I did the following:
: 1. Turn on the DVD player with no software inside or "NO DISC"

: 2. On the remote control, press "SETUP" and you will see an "on screen display" that will show Audio 1,
: Audio 2, Video language, and General

: 3. Press the "RIGHT ARROW" until "GENERAL" is selected

: 4. Press the "DOWN ARROW" down arrow once

: Make sure that the menu is set to "BASIC"

: 5. Press "DISPLAY"

: 6. Press "CONDITION MEMORY"

: 7. Press "1, 2, 3, 4, 5, OR 6" for the desired region

: 8. Press "SETUP" once and your region coding will have been changed.

: at step 5, it displays:
: Region:1 /ver 1.024(4) /Av1:7.00
: but step6 and step7, it didn't work, anyone knows why ? Thanks!

Other Replys

Reply to this message

Name:

E-Mail:
(optional)

Subject:

Message:
: : I did the following: : : 1. Turn on the DVD player with no software inside or "NO DISC" : : 2. On the remote control, press "SETUP" and you will see an "on screen display" that will show Audio 1, : : Audio 2, Video language, and General : : 3. Press the "RIGHT ARROW" until "GENERAL" is selected : : 4. Press the "DOWN ARROW" down arrow once : : Make sure that the menu is set to "BASIC" : : 5. Press "DISPLAY" : : 6. Press "CONDITION MEMORY" : : 7. Press "1, 2, 3, 4, 5, OR 6" for the desired region : : 8. Press "SETUP" once and your region coding will have been changed. : : at step 5, it displays: : : Region:1 /ver 1.024(4) /Av1:7.00 : : but step6 and step7, it didn't work, anyone knows why ? Thanks!

Reply to this message
Name:
E-Mail:	(optional)
Subject:
Message:	: : I did the following: : : 1. Turn on the DVD player with no software inside or "NO DISC" : : 2. On the remote control, press "SETUP" and you will see an "on screen display" that will show Audio 1, : : Audio 2, Video language, and General : : 3. Press the "RIGHT ARROW" until "GENERAL" is selected : : 4. Press the "DOWN ARROW" down arrow once : : Make sure that the menu is set to "BASIC" : : 5. Press "DISPLAY" : : 6. Press "CONDITION MEMORY" : : 7. Press "1, 2, 3, 4, 5, OR 6" for the desired region : : 8. Press "SETUP" once and your region coding will have been changed. : : at step 5, it displays: : : Region:1 /ver 1.024(4) /Av1:7.00 : : but step6 and step7, it didn't work, anyone knows why ? Thanks!